• Ventus 2c Ventus 2c Performance

    From £950.00
    Click image to enlarge

    This Scale 4.5 metre Ventus 2c has a fully moulded fuselage, wings and tail. All the parts are reinforced with carbon for strength.

    The wing profile is a special modified Eppler version to offer good performances in very broad speed ranges and conditions.

    The 2 piece wings have ready made holes for the 4 ailerons (2 inner & 2 outer) 2 flaps and 2 pop up brakes.

    The other controls are the rudder and elevator, optional controls are tow release and retractable undercarriage.

    The servos used can be the Hi-Tec HS 125 for the ailerons and flaps, the pop up brakes can be made electric and so do not need servos.

    We installed a Hi-Tec 5085 in the rudder ( the hole needs to be made) for the elevator and used a JR591 in the front of the fuselage for the closed loop rudder.

    The performance version has a carbon fuselage

    Ventus STD £850

    Ventus performance £950

    Span 4500 mm
    Weight

    3600g (empty)

    5500g (flying)

    Profile Eppler mod
    Controls R/E/A/F & pop up brakes
    Lay up Fibre glass & carbon

    Wing area: 64dmq

    Fuselage length:1.65m

    Flying settings

    Centre of gravity is 80 to 86mm from wing leading edge at the wing root.
    The wing incidence should be 0.5 to 1 degree.